RESUMEN
Lead-free relaxor ferroelectric ceramics with outstanding energy-storage (ES) density (Wrec) and high ES efficiency (η) are crucial for advanced pulse-power capacitors. This study introduces a strategic approach to maximizing the polarization difference (ΔP) by inducing a transition from the ferroelectric phase to the ergodic relaxor (ER) phase. By employing this strategy, a series of ceramics, (1 - x)(Bi0.5Na0.4K0.1)TiO3-x(Sr0.85La0.1)(Zr0.5Ti0.5)O3 (BNKT-xSLZT), with varying SLZT content (x = 0.05, 0.10, 0.15, and 0.20), were designed. The addition of SLZT enhances cationic disorder, induces vacancies at A sites, and disrupts long-range ferroelectric order, facilitating the formation of polar nanoregions and enhancing relaxor ferroelectric behavior. Furthermore, a viscous polymer process (VPP) technology is employed to optimize the ceramics' structure, aiming to increase the breakdown strength (Eb) and enhance ΔP. Ultimately, enhanced ES performance is demonstrated in BNKT-0.15SLZTVPP, achieving a remarkable Wrec of 6.85 J/cm3 and η of 84% under 470 kV/cm. This composition demonstrates excellent stability with minimal variations in Wrec (3.0%) and η (4.4%) over the temperature range of 20-110 °C. Additionally, BNKT-0.15SLZTVPP exhibits exceptional pulse charge-discharge properties, featuring a high discharge density of 3.72 J/cm3, a large power density of 164.2 MW/cm3, and a short discharge time (t0.9) of 193 ns under 300 kV/cm. The study validates the practicality of BNKT-0.15SLZTVPP for pulse capacitors and underscores the potential to enhance ES performance through A-site donor doping and VPP technology. This work provides a comprehensive understanding of the interplay among composition, structure, and ES properties in lead-free relaxor dielectric ceramics, laying the groundwork for innovative advancements in the field.
RESUMEN
The increasing awareness of environmental concerns has prompted a surge in the exploration of lead-free, high-power ceramic capacitors. Ongoing efforts to develop lead-free dielectric ceramics with exceptional energy-storage performance (ESP) have predominantly relied on multi-component composite strategies, often accomplished under ultrahigh electric fields. However, this approach poses challenges in insulation and system downsizing due to the necessary working voltage under such conditions. Despite extensive study, bulk ceramics of (Bi0.5Na0.5)TiO3 (BNT), a prominent lead-free dielectric ceramic family, have seldom achieved a recoverable energy-storage (ES) density (Wrec) exceeding 7 J cm-3. This study introduces a novel approach to attain ceramic capacitors with high ESP under moderate electric fields by regulating permittivity based on a linear dielectric model, enhancing insulation quality, and engineering domain structures through chemical formula optimization. The incorporation of SrTiO3 (ST) into the BNT matrix is revealed to reduce the dielectric constant, while the addition of Bi(Mg2/3Nb1/3)O3 (BMN) aids in maintaining polarization. Additionally, the study elucidates the methodology to achieve high ESP at moderate electric fields ranging from 300 to 500 kV cm-1. In our optimized composition, 0.5(Bi0.5Na0.4K0.1)TiO3-0.5(2/3ST-1/3BMN) (B-0.5SB) ceramics, we achieved a Wrec of 7.19 J cm-3 with an efficiency of 93.8% at 460 kV cm-1. Impressively, the B-0.5SB ceramics exhibit remarkable thermal stability between 30 and 140 °C under 365 kV cm-1, maintaining a Wrec exceeding 5 J cm-3. This study not only establishes the B-0.5SB ceramics as promising candidates for ES materials but also demonstrates the feasibility of optimizing ESP by modifying the dielectric constant under specific electric field conditions. Simultaneously, it provides valuable insights for the future design of ceramic capacitors with high ESP under constraints of limited electric field.
RESUMEN
The electrostrictive effect, which induces strain in ferroelectric ceramics, offers distinct advantages over its piezoelectric counterpart for high-precision actuator applications, including anhysteretic behavior even at high frequencies, rapid reaction times, and no requirement for poling. Historically, commercially available electrostrictive materials have been lead oxide-based. However, global restrictions on the use of lead in electronic components necessitate the exploration of lead-free electrostrictive ceramics with a high strain performance. Although various engineering strategies for producing materials with high strain have been proposed, they typically come at the expense of increased strain hysteresis. Here, we describe the extraordinary electrostrictive response of (Ba0.95Ca0.05)(Ti0.88Sn0.12)O3 (BCTS) ceramics with ultrahigh electrostrictive strain and negligible hysteresis achieved through texture engineering leveraging the anisotropic intrinsic lattice contribution. The BCTS ceramics exhibit a high unipolar strain of 0.175%, a substantial electrostrictive coefficient Q33 of 0.0715 m4 C-2, and an ultralow hysteresis of less than 0.8%. Notably, the Q33 value is three times greater than that of high-performance lead-based Pb(Mg1/3Nb2/3)O3 electrostrictive ceramics. Multiscale structural analyses demonstrate that the electrostrictive effect dominates the BCTS strain response. This research introduces a novel approach to texture engineering to enhance the electrostrictive effect, offering a promising paradigm for future advancements in this field.
